Follow the steps below to lift Model X. Ensure that any non-Tesla repair facility is aware of these lifting points.

1. Position Model X centrally between the lift posts.

2. If your Model X is equipped with air suspension, it automatically self-levels, even when power is off (see Jack Mode). Use the touchscreen to set the suspension as follows:

• TouchControls > Suspension.
• Press the brake pedal, then touch Very High to maximize the height of the suspension.
• Touch Controls > Service > Jack Mode to disable self-leveling.

3. Close the falcon wing doors.

4. Position the lift arm pads under the designated body lift points at the locations shown.

5. Adjust the height and position of the lift arm pads to ensure that they are correctly located.

6. With assistance, raise the lift to the desired height, ensuring the lift arm pads remain in their correct positions.

7. Engage any lift safety locks. Follow the lift manufacturer's instructions.