How to jump start

1. Open the hood

2. Remove the maintenance panel by pulling it upwards to release the trim clips that hold it in place.

3. On top of the low voltage battery, lift the locking tab that attaches the electrical connector to the connector housing.

4. On top of the low voltage battery, pull the connector housing to the left. The electrical connector releases from the low voltage battery.

5. Release the cover from the red positive (+) jump post, and then connect the low voltage power supply's red positive (+) cable to the red positive (+) jump post.

6. Connect the low voltage power supply's black negative (-) cable to the vehicle in the location shown.

7. Turn on the external power supply (refer to the manufacturer’s instructions) for 20-30 seconds.

8. When external low voltage power is no longer required, disconnect both cables, beginning with the black negative (-) cable.

9. On top of the low voltage battery, push the connector housing towards the electrical connector so that the electrical connector engages the low voltage battery.

10. On top of the low voltage battery, push down the locking tab that attaches the electrical connector to the connector housing.

11. Replace the maintenance panel by placing it back in its original location and pressing down until it is secure.

12. Close the hood.