How to jump start

1. Open the hood.

2. Remove the maintenance panel by pulling it upwards to release the trim clips that hold it in place.

3. Remove the red cover and connect the external low voltage power supply’s red positive (+) cable to the red positive (+) jump post.

4. Connect the external low voltage power supply’s black negative (-) cable to the bolt located between the brake fluid reservoir and the front trunk. The bolt is used as a grounding location for the external support.

5. Turn on the external power supply. Touch the touchscreen to wake it up.

6. Open the driver door and wait two minutes.

7. Ensure the vehicle is able to shift into Drive.

8. Replace the maintenance panel by placing it back in its original location and pressing down until it is secure.

9. Close the hood.